Industry News

Disposable Vapes reliability test project list

2022-08-02
What tests do Disposable Vapes need to be done in the list of Disposable Vapes reliability test projects? Disposable Vapes products have always received much attention is the texture experience and safety issues. Disposable Vapes products not only need to be tested one by one in all aspects of the selection of raw materials, the use of additives, and process planning. Multiple test experiments to correct the ideal taste experience.
The reliability testing items of electronic smoke samples are generally divided into three parts. Products, electronic smoke, and batteries, but with the gradual change of Disposable Vapes structure, the development trend of integrated design, the test project of its finished product is almost in harmony with the fog foggy. The detection of the chef is two.

1. Product of electronic tobacco

The taste experience of an Disposable Vapes is generally measured from the number of smoking, airflow, smoke, whether oil leakage, whether there is a burnt smell, and the temperature of the surface of the Disposable Vapes surface and the surface of the pyramid.

1. Number of mouth

Test smoke oil counting device

Automatic smoke: Test smoke oil automatic smoking test machine.

2. airflow

Artificial smoking, testing oil, smoking gas smoothly.

The smoking time and pause of the equipment timer for the automatic smoke oil setting the equipment timer.

3. Smoke volume

Smoking artificially, subjective smoke.

4. Oil leakage

Smoking artificially, you can't suck to smoke oil

Vibration test, product bare metal vibration frequency ** times/minute, shipping packaging vibration frequency ** times/minute, no oil leakage at the mouth and lamp cap.

5. Burning

Testing smoke oil must not have a burnt smell and any odor.

6. Work temperature

Automatic smoke: In the state of smoking, use the temperature measurement to contact the outer wall of the atomization heat device to detect the real -time temperature.

Second, atomizer

1. resistance value

Use the positive and negative poles of the digital bridge to contact the electrode and atomized thread of the atomizer to measure the resistance value.

2. airflow

Artificial smoking, testing oil, smoking gas smoothly.

The automatic smoke test tobacco oil, set the smoking time and pause time of the device timer, for example: 2 seconds to stop for 5 seconds, the smoke smoke volume OK state in the test machine suction.

3. Smoke volume

Artificial smoking: subjective feeling.

Automatic smoke: Debug the standard sample smoking status, set the smoking time and pause of the equipment timer, and the amount of smoke is OK when the amount of smoke meets.

4. Oil leakage

Smoking artificially, you can't suck oil.

Vibration test, product bare metal vibration frequency ** times/minute, shipping packaging vibration frequency ** times/minute, no oil leakage at the mouth and lamp cap.

5. Burning

Test that smoke oil can not have a burnt smell and any odor

6. Work temperature

Automatic smoke: In the state of smoking, use the temperature measurement to contact the outer wall of the atomization heat device to detect the real -time temperature.

Three, batteries

The battery detection mentioned here is not a separate detection of the battery, but whether the requirements for the entire product to measure the entire product are required;

1. Battery capacity

The positive and negative polar chip of the battery tolerate the instrument corresponds to the positive and negative ears of the battery.

2. Static current

Battery control board static current, battery battery static current.

3. Charging function

The power output voltage current is consistent with the input voltage current of the charger.

4. Smoking function

The LED lights are on during smoking, and the amount of smoke of the atomizer is not less than the real smoke. The adjustable battery can be adjusted through the tail rotation and the maximum and minimum voltage is based on the standard in the product specification book.

5. Smoking timeout protection

According to the battery working hours standard in the product specifications, press the battery to smoke key smoking to achieve the longest time for the battery to work for the longest time, the LED lights flickered*times, and the output is turned off.

6. Short -circuit protection

During the smoking process, the heating wire was short -circuited, the battery had no output, and the LED light flashed.

7. Low voltage protection

When the battery voltage is lower than the minimum voltage standard in the product specification book, the LED flickering after smoking button flickered after the smoking button, prompting the low electricity, and the battery has no output.

8. Charging protection

When the battery voltage is up to the rated, it is automatically disconnected and charged internally to prevent overload.

9. Overcurrent protection

When the battery is loaded, the discharge current is greater than the standard for Disposable Vapes, and the battery automatically shuts down to stop discharge.

10. Charging time

The battery is charged to the standard time of full power at a low voltage state.

Previous: VFOLK E -cigarette Evaluation: How about VFOLK e -cigarettes?

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept